Teradek Bolt Pro 300
Transmit uncompressed 1080p video wirelessly over 300ft with the Teradek Bolt Pro 300 Wireless Set. When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary. Unnoticeable latency is important for directors and focus pullers to see the action at the same time the camera does.
- Transmission Range: Provides up to 90m (300ft) of uncompressed video with a clear line of sight.
- Latency: Features zero delay (<1ms), ensuring no lag between the camera’s action and the monitor display.
- Video Quality: Supports up to 1080p60 4:2:2 video signals.
- Wireless Spectrum: Operates on the unlicensed 5GHz band and can coexist with Wi-Fi and cordless phones.
- Multicast Capability: One transmitter can broadcast to up to four receivers simultaneously.
I/O
| Feature | Transmitter (TX) | Receiver (RX) |
|---|---|---|
| Video Input | 1x 3G-SDI (BNC), 1x HDMI Type A | N/A (Wireless) |
| Video Output | 1x 3G-SDI Loop-through (BNC) | 1x 3G-SDI (BNC), 1x HDMI Type A |
| Data/USB I/O | 1x Mini-USB (Firmware/Config) | 1x USB 3.0 Micro-B (GRAB Engine) |
| Power Input | 2-pin LEMO (7-28V DC) | 2-pin LEMO (7-28V DC) |
| Power Consumption | ~6.5 Watts | ~8.5 Watts |
| Lemo Pinout | Pin 1: GND, Pin 2: +DC | Pin 1: GND, Pin 2: +DC |
| Audio | Embedded 48kHz 24-bit PCM | Embedded 48kHz 24-bit PCM |
Video Format
| Resolution | Supported Frame Rates (fps) |
|---|---|
| 1080p | 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 |
| 1080psf | 23.98, 24, 25, 29.97, 30 |
| 1080i | 50, 59.94, 60 |
| 720p | 50, 59.94, 60 |
| 576p / 480p | 50, 59.94 (HDMI Only) |
| 576i (PAL) / 480i (NTSC) | 50, 59.94 |
Related products
