Teradek Bolt Pro 2000
The Teradek Bolt Pro 2000 is a zero-delay wireless video transmission system designed for high-end film and television production. It transmits uncompressed 1080p60, 4:2:2 video up to 2,000 feet (approx. 610 metres) line-of-sight over the unlicensed 5GHz band.
- Transmission Range: Up to 2,000 feet (approx. 610 metres) line-of-sight.
- Latency: Zero delay (less than 1ms), critical for real-time focus pulling and monitoring.
- Video Quality: Transmits uncompressed 1080p60 video with 4:2:2 color sampling.
- Connectivity: Available in 3G-SDI, HDMI, or Dual models. The receiver often features both SDI and HDMI outputs along with a USB 3.0 “GRAB” engine for direct laptop capture.
- Multicast: Can transmit to up to 4 receivers simultaneously without losing signal quality
I/O
| Feature | Transmitter (TX) | Receiver (RX) |
|---|---|---|
| Video Input | 1x 3G-SDI (BNC), 1x HDMI Type-A | N/A |
| Video Output | 1x 3G-SDI Loop-through (BNC) | 2x 3G-SDI (BNC), 1x HDMI Type-A |
| Data/GRAB Engine | 1x USB 3.0 Mini-B (Firmware/GRAB) | 1x USB 3.0 Micro-B (GRAB Engine) |
| Power Input | 2-Pin LEMO (7-28V DC) | 2-Pin LEMO (7-28V DC) |
| Power Consumption | ~7.7 Watts (at 1080p60) | ~8.0 Watts (at 1080p60) |
| Internal Battery | 60-min Li-Ion (SDI/Dual models only) | None |
| Antenna Interface | 2x RP-SMA Connectors | 5x RP-SMA Connectors |
TX Inputs
Component Dimensions Weight
Transmitter (TX)11.0 x 6.6 x 2.5 cm / 4.3″ x 2.6″ x 1.0″249 g/8.8 oz
Receiver (RX)13.9 x 11.6 x 2.5 cm/ 5.5″ x 4.6″ x 1.0″476 g/16.8 oz
Video Format
| Interface | Supported Resolutions | Frame Rates (fps) | |
|---|---|---|---|
| 3G-SDI | 1080p, 1080psf, 1080i, 720p, 480i (NTSC), 576i (PAL) | 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 | |
| HDMI | 1080p, 1080psf, 1080i, 720p, 576p, 480p | 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 | |
| USB 3.0 | Up to 1080p60 | 23.98 – 60 |
